 |
Direct Contact™
Analyzer
A fast and convenient
NIR instrument for food analysis with minimum handling. The sample is
placed directly on the scanning stage. Measures all common parameters as
fat, moisture, protein, sugars etc. in products like candy, gels,
chocolate crumbs, pastes. |
 |
Direct Light System™
The Rapid Content
Analyzer is a true multipurpose analyzer and can be used to analyze
powders, liquids, or finished dosage forms without requiring a change to
the instrument. Analyze incoming raw material powders or liquids
directly in vials, bottles, beakers, or sample bags for identification
and qualification in seconds.
|
|
Dryer™ Analyzer
Dryer™ Analyzer
provides quick and accurate in-situ analysis of moisture and common
solvents in powder drying processes in the pharmaceutical and chemical
industries. Non-destructive measurements are obtained directly in the
dryer and require no additional sample handling or sample extraction
devices. |
 |
Fibertec™ Systems
Fibertec™ Systems
enable semi-automated hydrolysis, extraction, digestion and separation
systems for optimal crude, detergent and dietary fibre determinations,
according to approved methods and standards in batches of six samples. A
modular system, FiberCapTM, based on filtration and sample transfer
procedures has low investment cost and is preferable to manual standard
methods. Analyse up to six batches of 6 or 18 samples, in parallel,
simultaneously giving 36 to 108 finished extractions in 90 to 120
minutes.
|
|
Interactance Probe
Systems
Imersion probe
systems are designed to be used in large diameter process streams or
reactors where transmission measurements are not possible. Interactance
Probe systems allow for real-time monitoring of process constituents. |
|
MicroBundle
Multiplexer
A Multiplexer system
allows for continuous sequential monitoring of multiple sampling points
in a process, or multiple process streams. The Multiplexer is available
for Transmission or Interactance Imersion probe systems. |
 |
MultiMode™ Analyzer
The MultiMode™ Analyzer,
a versatile system that is generally used for method development, offers
the capability to measure liquids, solids, pellets, powders and other
forms of polymeric materials. |
|
MultiVial™ Analyzer -
XDS Series
The FOSS MultiVial™
Analyzer, based on XDS near-infrared (NIR) technology provides the next
generation of dedicated NIR analysis for rapid non-destructive
measurements of solids in vials.
|
|
Oils and Fats
Analyser
Fast and reliable
solution for oil refineries and olive oil mills.
|
 |
OptiProbe™ Analyzers
For convenient
laboratory method development leading to on-line process applications,
the OptiProbe ™ System Analyzers are an essential tool. Fiber optic
modules are available in transmission, interactance-immersion,
interactance-reflectance, transmission pair and remote reflectance modes
for measurements on liquids, solids, slurries, semi-solids or powders.
|
|
Polyol Analyzer
The compact,
automated unit is designed to replace routine titration and other types
of wet-chemical testing that require highly trained labor and the use of
solvents and reagents. Polyol producers can monitor the OH# and acid
values of
|
|
Rapid Content™
Analyzer
The Rapid Content™
Analyzer offers fast, cost-effective testing of a whole range of
pharmaceutical manufacturing applications. Based on near-infrared (NIR)
technology, sample analysis is non-destructive, and does not require
sample preparation or hazardous reagents. |
 |
Rapid Content™
Analyzer - XDS Series
The FOSS Rapid
Content Analyzer, based on XDS near-infrared technology, provides the
next generation of dedicated NIR analysis for rapid non-destructive
measurements of solid and liquid chemical and pharmaceutical
formulations. With the XDS Rapid Content Analyzer you can replace
routine tests, reduce product hold time and virtually eliminate
quarantine time. any solid form.
|
|
RapidResin™ Analyzer
The FOSS RapidResin™
Analyzer identifies look-a-like polymer resin materials and spots
contaminants. The RapidResin Analyzer works with most types of
thermoplastic resin pellets. |
|
ReactSys™
Manage optimum
end-point by continuously monitoring multiple-phase reactions (i.e.,
fermentations, crystallizations, precipitation, emulsions,
polymerizations). Automatically switch between reflectance (turbid
media) and interactance immersion (clear media) based upon reaction
properties. |
 |
Single Fiber Systems
Single Fiber Optic
Systems provide remote measurement of clear to semi-clear liquids as
well as gases. These rugged instruments measure the sample over long
(typically 100 meters) single fiber-optic runs, so the instrument is
located away from the harsh process environment.
|
 |
SmartProbe Analyzer™
- XDS Series
The FOSS SmartProbe
Analyzer™ with XDS near infrared technology is the next generation of
dedicated NIR analysis for rapid non-destructive measurement of liquid
and solid chemical and pharmaceutical formulations. |
 |
SmartProbe™ Analyzer
The SmartProbe™
Analyzer identifies incoming raw materials, excipients and actives,
directly in the shipping container. Interchangeable probes permit the
SmartProbe to perform liquid measurements as well. |
 |
Soxtec™ Systems
The Soxtec™ Systems,
the fastest on the market, for multipurpose automated solvent extraction
of food, animal feed, grains, textiles, water, plastics, rubber and many
more without loss of accuracy. The entire extraction takes place in a
closed, secure system. A complementary Hydrolysis system enables Total
Fat determinations to be performed.
|
|
Transmission Systems
Transmission
Systems are used for analysis of clear to opaque fluids, slurries,
suspensions, pastes and films. Applications include viscous samples,
polyols and organic solvents.
|
|
Vial AutoSampler
Ruggedly designed for
use on the loading dock, plant floor or laboratory the Vial AutoSampler
offers convenient, cost-effective analysis of pharmaceutical products in
vials. This system will automatically analyze fifty pre-loaded vials
unattended. |
